Videos
Watch videos showcasing Mader Presses in action, including demonstrations of manual, pneumatic, and hydro-pneumatic models and their applications.
Micrometer stop (MICRO)
For high-precision assembly work with rack and pinion presses, if it depends on the workpiece being positioned in a high-precision way.
Table bore (TB)
Lower dies can be incorporated in the centrered table bore. Fixing takes place with a transverse screw. The table bore enables a quick tool change and reduces the set-up times. This option is possible for all manual presses or for other presses on request.
Return travel lock (HS)
Partial strokes, and thus incomplete manufacturing processes, are eliminated with the return travel lock for manual toggle presses and rack and pinion presses. Distortion, joining or connection processes are always carried out safely and in full: An effective contribution to quality assurance. The press’s return stroke is blocked in the downstroke. If the stroke was initially carried out in full, the lock is released and the lever can be reset. A release mechanism ensures that canted parts can be removed.
Stroke counter (Z)
The number of pieces reduced can be quickly reviewed with the five- digit stroke counter. This option is possible for all manual presses.
Precision ram adjustment (DP)
As toggle presses first reach their maximum strength in the bottom dead centre (BDC), the vertical adjustment of the press heads is often too imprecise via the threaded spindle. With the precision ram adjustment, the press’s pressure point can be adjusted precisely at the ram. The scale of the adjusting ring permits a readable fine adjustment of 0.02mm. The adjustable range is ±1.5mm. The precision ram adjustment is set if it depends on the highest precision of the wheel offset. Ideal for prototype construction and volume production, if delicate and easy adjustment within the tolerance range is required.
Hand lever change of EP series
The ERGOPRESS® hand lever provides an unobstructed view of the work area and is continuously adjustable through 360°. Another advantage: Simple and easy conversion for left-handers (except HS and Zoption) without losing the tool setting. Ideal for job sharing onone press.
Height adjustment of the KP series
The precision height adjustment of the press table simplifies the set-up of Press & Tool Concept presses and increases their application possibilities.
Rack-and-pinion press MPZ 500-30
Optimal for exact assembly work in precision mechanics: The MPZ MicroPress® rack and pinion press is the perfect solution for all applications where the required force is low but the operator wants to carry out delicate work simultaneously. Additional advantages are the lightweight design, easy conversion from right-handed to left-handed operation, the adjustable working height and the precise guidance of the ram.